Parts & Accessories

Our biz? Powerful fizz! That's the magic of Bottle Bright, the natural, biodegradable, grime-fighting cleaning tablet that takes your toughest-to-clean bottles to task. Easy-to-use and ultra-efficient, Bottle Bright tablets dissolve in water creating tiny, effervescent bubbles that power through stubborn stains and odors, taking your favorite bottles and beverage containers from "ewww!" to "oooh!" in only a matter of minutes, no scrubbing, rubbing or sponging required!

Replacing your bite valve from time to time helps maintain your hydration system. HydraPak's Bite Valve Sheaths provide a soft bite and are made of durable silicone. Perfect for chewers or to keep in your emergency gear kit with your bandaids and duct tape. Fits and replaces all HydraPak bite valves on our Reservoirs, SoftFlasks, and UltraFlasks. - Sheath replacement for Blaster Bite Valve, Phaser Bite Valve, and Rocket Bite Valve, compatible with all HydraPak Soft Flasks - Sheaths include inner posts

The Camp Tap inserts into a Plug-N-Play connector to create a versatile dispensing solution at basecamp. Push to dispense water and release to autoseal, locks open for fast filling or washing hands, rinsing cookware, etc. - Push to dispense and release to autoseal, locks open for faster filling - Camp Tap has 2x the dispensing rate of a standard hydration system on/off valve - Fits all HydraPak Plug-N-Play systems—1/4 in. diameter fitting

Fits into Plug-N-Play Caps and Connectors to create a direct connection between your 28mm backcountry water filter and HydraPak Seeker storage containers, Flux bottles and reservoirs. - Compatible with most 28mm threaded water filters. - Must be paired with a HydraPak Plug-N-Play connection in order to work. - Compatible with most 28mm threaded water filters - Fits HydraPak Plug-N-Play Cap and Quick & Inline Connectors – 1/4 in. diameter fitting

Water that tastes good, goes down good. Made with taste-free TPU, the HydraFlex drink tube is designed to keep your water tasting fresh. And because it's non kinking, you receive a steady flow every single time. - Flexible, non-kinking 36" drink tube provides a steady flow - High-flow Blaster bite valve self seals after each sip and features a twist on/off bar to prevent leaks when not in use - Tube designed in the ideal durometer for easy routing - Safe and reliable, 100% BPA & PVC free

Create a custom inline connection with your reservoir. An easy upgrade to any HydraPak reservoir, simply cut your tube in the desired position and attach the Inline Connector components to each side. Disconnect it with the push of a button, for convenient refills while leaving the hose in position on your pack. Ideal for filtering water directly in the backcountry. - Push button technology quickly connects/disconnects - Automatic shut-off for leak-proof tube removal - Can also be used to combine two tubes together to create a longer hose - Universal size, fits all 1/4" diameter drink tubes

Quickly connect a drink tube to your HydraPak Seeker or HydraPak water bottle for versatile backcountry use with the Plug-N-Play cap. Use inside your pack like a hydration reservoir, strap outside like a bottle, or quickly setup a gravity feed at camp. - Twist release technology quickly connects / disconnects HydraPak drink tube (not included) - Automatic shut-off for leak-proof tube removal - 42mm screw cap fits Stash 750ml and Seekers - Includes a dirt guard with tether to keep your cap clean

Simply put, some athletes thirst for more. That's why we developed our high capacity 3 liter Shape-Shift. Like it's smaller brother, it's extremely durable, fully reversible for easy cleaning and, like all our reservoirs, helps you perform at your highest levels. Low Profile An adjustable baffle maintains a low-profile when filled and increases stabilization during high impact activities Easy To Clean Simple to use slider top makes it fully reversible for cleaning and drying, easily turns inside out Plug-N-Play Quickly disconnect the drink tube (an auto shutoff valve prevents leaking) for convenient refilling High Flow Engineered with updated high performance features and an enhanced design for 20% more flow

SpeedCup is the quick and easy watering solution; whether you're racing in the Rockies or backpacking in the Himalayas. It's lightweight, easy to hold, reusable and collapsible so you can tuck it almost anywhere. Reusable Minimizes waste on the trail and at race events, gives you access to quick hydration Compressible Soft material is flexible so you can stuff it or clip it anywhere, easy to drink and hold

Here's a runner's gear essential. Designed to be more comfortable in vests and packs, the Velocity 1.5L features an ergonomic slide-seal top. It's our lightest reservoir yet, and the wide opening makes for rapid refills at aid stations. Never run on empty. Ergonomic A perfect fit for most standard hydration vests with an ergonomic slider with no sharp edges, to reduce chafing Slim Profile Designed to eliminate sloshing and be more comfortable in running vest packs Easy To Clean Simple to use slider top makes it fully reversible for cleaning and drying, easily turns inside out High Flow Engineered with updated high performance features and an enhanced design for 20% more flow

The Velocity IT 1.5L features our IsoBound insulation technology that keeps water cold and won't sweat in warm temperatures. Engineered to keep fluids at an ideal temperature 38% longer than a standard reservoir. After all, cold water is more refreshing. Isobound Insulation Prevents heat transfer from the user to the hydration, it is the ideal solution for a wide range of outdoor endurance activities Sweat Proof Four-layer design provides users with more structure an enhanced grip, and a no-sweat, comfortable carrying experience Ergonomic A perfect fit for most standard hydration vests with an ergonomic slider with no sharp edges, to reduce chafing High Flow Engineered with updated high performance features and an enhanced design for 20% more flow

Hydrate smarter with this handy insert that eliminates the usual spill when drinking from wide-mouth bottles. Made of BPA-free silicone, the Watergate fits into our Stash 1L bottles as well as most others. Stop the splash and keep your water in your bottle—for when you need it most. - Insert grips into most 63mm wide mouth bottles to provide an easier drinking experience and prevent water spilling when you're on the go - Universal size, fits most wide-mouth water bottles (including HydraPak Stash 1L) - Made of food-grade silicone that will not absorb or retain odors and tastes - Safe and reliable, 100% BPA & PVC free

CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.

Replace that old bite valve! CamelBak's Big Bite Valve mouthpiece slip on easily and add some color to your hydration. And, they're remarkably drip resistant.

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in

- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.

Keep your filtration bottle primed and ready for the next big adventure. The replacement LifeStraw Bottle Filter Set in size large fits the Eddy + 32 oz filtered by LifeStraw vacuum stainless steel bottle. Water passes through two separate stages of filtration-the Hollow Fiber Filter removes bacteria, parasites, and microplastics and the Ion Exchange Filter reduces lead, bad taste, chlorine and other unwanted chemicals.

Dry your reservoir quickly with the CamelBak Reservoir Dryer.

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.