Lubes/Cleaners

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

The Muc-Off Bike Care Duo Kit covers Stage 1 and 2 in the Muc-Off cleaning system. Our award winning Nano Tech Bike Cleaner cuts through dirt, mud and grime quickly and safely without the need for acids or dangerous chemicals. This unique formula is also 100% biodegradable so it's safe for your bike and the planet. After you've given your bike a good clean with the Nano Tech Bike Cleaner, it's time to add some protection. Muc-Off Bike Spray is the ultimate post-wash water dispersant. Not only does Bike Spray rid your bike's frame and components of moisture, but it also leaves a non-sticky layer of protective PTFE to prevent rust and corrosion. It also makes future cleaning and maintenance a breeze. - Contains Nano Tech Bike Cleaner, Premium Formula PTFE Bike Spray and cleaning sponge

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in wet and harsh conditions. Formulated with unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for: Chains, cables, shifters, derailleurs & pedals. - Specifically designed for the hi-torque loads applied to an eBike chain - Creates a ceramic coating for incredible durability and long-distance performance - Contains Boron Nitride compounds - Ceramic compounds provide ultra-low friction for excellent efficiency - Waterproof - excels in wet conditions - Readily biodegradable - Ideal for road and off-road - Integral UV tracer dye - aids a

- Goes on wet to penetrate rollers and side plates, then sets up to a soft, pliable wax - Chain is encased in a waterproof layer, shielded from dirt and grime - Special low melt point wax replenishes drivetrain by slow-Feeding clean lube from the inside layers outward, significantly reducing abrasive wear and eliminating corrosion - Smooth, quiet, trouble-free operation in all conditions for long lasting protection

Fingerprints and glossy marks are now a thing of the past. Matte Finish Detailer has been specifically developed for satin matte paints, matte finishes and matte vinyl wraps. The premium-grade formula will leave any matte surface with a streak and gloss-free protective finish that reduces dirt adhesion. - Quick to use spray developed specifically for matte finishes - Leaves a non-sticky, streak and gloss-free protective finish - Carbon Fiber safe - Biodegradable

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

Chill Zone™ is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone™ a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

- State-of-the-art, professional-strength biodegradable cleaner - Rapidly breaks down the stickiest of oils, grease and the nastiest grime on all chains - A unique combination of active ingredients rips through dirt and oil without damaging the chain - Safe to use in Ultrasonic Tanks up to 40°C - Quickly, easily and gently removes oil, dirt and grime - Formulated to be ultra-safe - Water-based and readily biodegradable* formula - Solvent-free & non-caustic - Easily washes off with water * Only contents are biodegradable

- Highly efficient carbon fiber assembly compound designed to prevent over-tightening and create a secure coupling between surfaces - Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque without causing fatigue or internal fractures or shortening component life

The industry's original and most versatile dry-style bicycle lubricant is now formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free, sets up with a dry ‘wax-like’ film, attracts less dirt and grime, and delivers a low coefficient of friction over long re-lubrication intervals. Dry Lube is especially recommended for riding on or off-road in dry, dirty, dusty environments, yet it holds up well in moderately wet conditions. Dry Lube can also be used on derailleurs, shifters, cables, and brake pivot points. Finish Line's Dry Lube provides optimum drivetrain efficiency without attracting an excessive amount of abrasive contaminants. Features: - Formulated with Non-Stick Ceramic Technology - Quickly sets up dry and clean - Low surface tension - 100% Fluoro-free Benefits: - Lowers friction, improves pedaling efficiency, and reduces wear - Minimizes the attraction of abrasive contaminants - Easily penetrates chain pins and coats pivot points - Meets the highest standards of biodegradability

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.

Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features: - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

SILCA Super Secret Chain lube started out as a project to develop the fastest hot-melt wax lubricant available more than a year ago. Josh has been recommending Hot Melt Wax and helping Pro cyclists and triathletes wax chains for years and wanted to bring his lubricant formula to our customers, the challenge was how to consistently melt, dip and agitate the chain across different crockpot designs and temperatures.  The project took a fascinating turn from the world of IndyCar when Josh was introduced to a group that had developed a technology to put micro-scale wax powders into a solution that was quick-drying and forms a coating that is indiscernible from hot melt dipping. The combination of air-drying liquid wax and Tungsten Disulfide would quickly prove to beat all currently available hot-melt waxes in friction testing while being much faster and easier to apply. Best of all perhaps is that this formula would prove to be very environmentally friendly, utilizing 4 different types of wax, nanoplatelets of WS2 (Tungsten Disulfide), and mild alcohol to act as a carrier. This same alcohol is used in the SILCA Gear Wipes, making them a perfect product to clean and remove Secret Chain Lube. - 4 oz. and 8 oz. bottles with the precision applicator tip for dripping on your chain, or 12oz lube (leaving room for your chain) for dipping the chain - The chain should be VERY clean and dry before applying - Apply according to video and let dry for AT LEAST 12 hours for optimal results, 24 hours if applied in cool or humid weather conditions! We recommend applying the lube AFTER your ride so it's ready for next time! - NOTE: Over time the WS2 will begin to settle to the bottom of the bottle, shake well before using!

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1). For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids. Features: - For use in all vehicles specifying DOT 5.1 brake fluid. - Durable and reliable stopping power. - Anti-vapor lock formulation maintains a responsive lever and pedal feel. - Resists corrosion, oxidation, and boil-off. - Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids. - Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

Specifically formulated for Fox dropper posts

- Biodegradable, non-toxic all-purpose cleaner - Fast-Acting cleaning agents lift away dirt while scrubbing grime and oil deposits - Specially engineered surfactants lower surface tension allowing better penetration and wetting of soils - Tough on dirt, yet gentle enough to use on delicate surfaces including paint, plastic, chrome, anodized finishes, rubber, carbon fiber, aluminum and magnesium - User friendly formula cleanly washes from the surface - Contains no harmful acids, CFC's or solvents.

RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid

- Film forming lubricant designed to protect moving components and wear surfaces during assembly and initial break-in - Shields metal-To-metal contact and offers excellent rust and corrosion protection during long service periods and storage - Formulated with high levels of anti-Wear and extreme pressure additives and surface active chemistry to reduce friction. Two times zinc activates at both high and low operating temps providing unsurpassed protection. Non-Foaming