Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

$113.50
The Descendant 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately BB Included: No Chainring BCD: SRAM Direct Mount Crank Intended Use: Mountain Number of Chainrings: Single Drivetrain Speeds: 12, 11, 10 Spindle Interface Type: SRAM DUB Chainline/Hub Compatibility: 135/142 MTB Hubs
$114.99
- 2-PIECE CRANKSET for 157 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 181 mm - Direct mount chainring - Chain Line 56.5 mm - 1x12-speed
$314.99
An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
$171.00 - $197.00
Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)
$11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
$145.00
The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No
$29.99 - $35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$12.95
- Lower slider replacement parts for E-13 chainguides
$12.95
- Service parts for E-13 chainguides
$9.95
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications
$17.95
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
$399.00
e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No
$399.00
The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No
$349.00
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 6800 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings
$39.95
- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)
$59.95
The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with the Race Face Cinch cranksets that have a removable spider
$29.95
CAMO Spider - Made from Aluminum alloy for light weight - Includes 5 black chainring bolts
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
$64.05
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
$61.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
$61.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$61.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
$61.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
$64.05
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Page 1 of 8 Next page