Tape

Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.

SRAM's SuperCork Bar Tape boasts a soft, stylish suede finish for a great grip and feel with or without gloves.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

- High-friction silicone coating offers extra anti-slip and hand feel in wet condition. - Ultralight EVA foam backing. - Shock proof foam with water wave pattern. - 2.5mm thick.

- PU and microfiber material - Extra grippy for all conditions - Smart silicone adhesive back (easy to replace) - Thickness: 2.5mm

MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal. - PU material with anti-slip coating improves grip over traditional cork material - Gel backing provides vibration damping and extra comfort - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

When everything is on the line, questioning your handlebar wrap shouldn't be on your mind. The WCS Race bar tape has just the right amount of cushion and a grippy feel for enhanced hand-to-bar interaction. - Superlight PU with perforations, 1.8mm thick - Embossed Ritchey logo - Only 63g

The Ritchey Comp EVA bar tape is soft and comfortable while providing a true road feel.

- 3.5mm thick, ergonomic handlebar tape for all road bike disciplines - EVA foam distributes pressure and reduces hand discomfort - Tape is durable and provides increased vibration damping - Anti-slip surface texture - Built-in wrapping guide for thinner or thicker wrapping - Wrap in two directions; for increased grip or more freedom of movement

Pro's Microfiber Smart Silicon Handlebar Tape is soft to the touch for top comfort. It's made of synthetic leather with perforations for an excellent grip and top control even in the wet. This fine tape has an adhesive backing for easy wrapping and a stay-put hold and it's made to last.

PDW Wraps with Silicone Grip take our much loved PDW Wraps to a whole new level of comfort! Like no other handlebar tape before, the PDW Wraps with Silicone Grip are constructed of durable tightly woven nylon, with added strips of clear silicone to provide superior grip and comfort. The woven nylon and silicone grip is layered over cush foam with a self-adhesive backing. The PDW Wraps With Silicone Grip make sure that both the style and comfort of your ride are decked out to the max!

MSW Anti-Slip Gel+ tape brings the best of everything, giving you the comfort of silicone gel backing, the control of MSW's anti-slip coating, and the durability of micro-fiber cloth all in one package. - Micro-fiber layer reduces stretch and adds durability - PU material with anti-slip coating improves grip - Gel backing for extra padding, comfort and control - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

SRAM's RED Bar Tape is perfect for upgrading your handlebars and adding comfort and style to your bicycle, too. You get enough handlebar tape to wrap both sides, S logo plugs for a touch of class, and a texture that matches SRAM's RED shifter/brake hoods.

- 3mm microfiber handlebar tape - Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a Polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability - Kit includes: 2 strips of microfiber tape and 2 rubber bar end plugs - Tape Length: 215mm

- High-Friction PU Surface Improves Grip And Reduces Slipping - Microfiber Backing Provides A Smooth, Comfortable Feel - Embossed Diamond Pattern Looks Powerful And Improves Overall Grip - 3.0mm Thick

The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - 2.5mm of cushion similar dampening to 3.5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program

Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - Washable surface is resistant to wear and packing out - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch - Length: 152cm

- 2.5mm thick, ergonomic handlebar tape for all road bike disciplines - EVA foam distributes pressure and reduces hand discomfort - Tape is durable and provides increased vibration damping - Anti-slip surface texture - Built-in wrapping guide for thinner or thicker wrapping - Wrap in two directions; for increased grip or more freedom of movement

An adventurous mix of trail, deteriorated road and patchy tarmac follow along the Gazos Creek as it winds its way through the dense forestation, undulating topography and remote challenges of Big Basin Redwoods State Park in California. A local microbrewery is conveniently located at the terminus of these roads and trails, where Gazos Creek Road meets California Highway 1. This collection of breathtaking riding possibilities, and countless others like it in these California mountains, is where Tom Ritchey, his mentor Jobst Brandt and a small group of venturesome friends spent countless days exploring its gravel surfaces, serpentine turns, unending climbs and sketchy descents more than 40 years ago. The new WCS Gazos bar tape is named as an homage to the spirit of Tom's pioneering rides on those rough roads and trails so many years ago. Measuring an impressive 230cm, the Gazos bar tape ensures enough coverage for modern gravel bars, such as the Ritchey VentureMax XL and Beacon XL, which tend to be much wider than traditional road bars. The exquisite comfort of the Gazos bar tape is made possible by its superlight polyurethane material that offers a confident grip, while a real gel backing delivers supreme cushioning. Long rides. Wide bars. Unending adventures. The Ritchey WCS Gazos bar tape is the wrap you want for when you’re out blazing your own trail.

When the going gets rough, the rough gets Pave. 3.5mm thick bar wrap provides extra cushion in any hand position.

Padded, Hard-wearing, All-Surface Absorption. Cambium Rubber Bar Tape is suitable for cyclocross, gravel, or road and comfortable for cycle touring with extra padding to reduce road buzz and provide a more comfortable grip over rough surfaces. All-surface absorption Designed to absorb shocks and smooth out the ride. Comfortable to the touch The perfect material for a pleasing grip for natural comfort and complete control. Hard-wearing Made with wear and tear-resistant materials. - Comfortable to the touch - Hard-wearing - All-surface shock absorption

ESI Grips NEW RCT Wrap is perfect for Road, Cyclocross, or Triathlon riders, especially riders looking for extra shock absorption and comfort compared to a normal bar tape. ESI RCT Wrap is constructed for a smooth overlay and customizable thickness. If you are looking for a thick grip, wrap it looser. If you are looking for a thinner grip, wrap it tighter. It's that easy! - 134-176 grams (Depends on how you stretch) - 3.5mm Thick - 1" Wide - 2 Rolls at 6'2" each - Custom Fit - Stretchable - Custom Density - Shock Absorbing - Comfortable - Super Tacky - No Adhesives - Long-lasting - Easy to Install Package Includes: - 2 long silicone wraps (for wrapping bar) - 2 short silicone wraps (for under hood) - 2 Silicone Tapes (adhere to themselves – 1-time use) - 1 pair of NEW custom larger Bar Plugs

• Anti-vibration gel absorbs shock for increased comfort • Includes Giant logo end-plugs and Giant finishing tape

• Durable half-perforated PU surface embossed with the Liv logo • EVA foam base absorbs shock and increases comfort • Includes Liv end-plugs and finishing tape • 2.0mm thick

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

• Half perforated surface • EVA integrated absorbs shock and increases comfort • Durable all-conditions perforated surface for ventilation • Thickness: 2.3mm • Includes Liv end-plugs and finishing tape

- High-friction PU surface improves grip and reduces slipping - Microfiber backing provides a smooth, comfortable feel - Embossed tulip pattern looks powerful and improves overall grip - 3.0mm thick

- High-friction PU surface improves grip and reduces slipping - Microfiber backing provides a smooth, comfortable feel - Embossed tulip pattern looks powerful and improves overall grip - 2.0mm thick

Jagwire Pro Bar Tape matches style with superb comfort and control. Developed to complement our cable kits, this tape cushions handlebar vibrations and provides exceptional grip when riding with or without gloves. The included locking bar end plugs secure the tape with a clean finish. Offered in distinct varieties to match the corresponding housing colors, Pro Bar Tape adds style and is easy to clean. - Features a tacky finish for superior grip in all conditions - 3.0mm thick and uses a 3-layer construction with a breathable polyurethane (PU) surface for extra comfort - Lightweight foam inner layer saves 40% weight compared to similar 3.0mm thick bar tapes - Includes lever strips, screw-type locking bar end plugs, and finishing tape - 2160mm length is enough to wrap most drop handlebars